Skip to Main Content
It looks like you're using Internet Explorer 11 or older. This website works best with modern browsers such as the latest versions of Chrome, Firefox, Safari, and Edge. If you continue with this browser, you may see unexpected results.
FGCU Logo

Glowforge

Available Materials

Material Type Cost per sq. in.
Medium Clear Acrylic (5” x 10” x 1/8”) 0.13
Thick Clear Acrylic (5” x 10” x 1/4”) 0.14
Medium Clear Acrylic (12” x 20” x 1/8”) 0.08
Thick Clear Acrylic (12” x 20” x 1/4”) 0.11
Light Maple Plywood (12” x 20” x 3/25”) 0.07
Medium Maple Plywood (5” x 10” x 1/8”) 0.09
Thick Maple Plywood (12” x 20” x 1/8”) 0.11
Medium Draftboard (Unfinished) (12” x 20” x 1/8”) 0.04
Thick Draftboard (Unfinished) (12” x 20” x 1/4”) 0.05
Thin Natural Leather (5” x 10” x 1/48”) 0.28
Medium Natural Leather (5” x 10” x 3/64”) 0.34
Thick Natural Leather (5” x 10” x 3/32”) 0.37
Medium Natural Leather (12” x 20” x 3/64”) 0.20
Thick Natural Leather (12” x 20” x 3/32”) 0.24
Engraving 0.00

If we do not have a material you are looking for you may provide your own, however we will only accept Proofgrade Materials recommended by the manufacturer. You may view the materials here. For a large amount of prints, above 1 total sheet, you will need to provide your own materials.

Cost Estimator


*Total cost is an estimate and may not reflect actual cost. Total cost includes 6.5% tax and 8% administrative costs.